Flower Forest Level 28 - Run the Pipe to D-E-H-I-F-C-B-A
How to Beat Level 28 Flower Forest
- 1Drag the scattered blue pipe pieces, including straight pipes, bends, and short connectors, into the frame in the top-right corner.
- 2Start by attaching the horizontal pipe near the white round inlet, then extend the line toward the center and down.
- 3Bend the line right, climb up the right edge of the frame, and finally hook up to the arrow outlet at the top.
- 4After every move, check that each end of pipe is flush with the next piece so the main line stays unbroken and no wrong branch is added.
Level 28 Flower Forest - Final Answer
How to read the answer: Treat the inside of the pipe frame as a 3×3 letter grid and follow the only connected route starting from the white round inlet. The line begins at middle-left D, enters the center E, drops to bottom-middle H, moves right to bottom-right I, then climbs up through middle-right F, top-right C, and top-middle B, and finally reaches top-left A where the arrow sits. Read in travel order and the answer is D-E-H-I-F-C-B-A.
Flower Forest Level 28 - Run the Pipe to D-E-H-I-F-C-B-A
The twenty-eighth walkthrough of Flower Forest - Word Puzzle sets the scene around a frame in the top-right corner and a pile of blue straight pipes, bends, and short connectors. A white round inlet sits on the left edge of the frame and an arrow outlet waits at the top. The starting frame has every pipe scattered and nothing connected. The answer frame freezes the moment every pipe clicks end-to-end and forms one continuous run from the white inlet, around the inside of the frame, all the way to the arrow.
This is a pipe-routing puzzle. Anchor the inlet first, work your way around the 3×3 letter grid inside the frame, and finish by connecting to the arrow at the top.
Level 28 Flower Forest Key Takeaways
- Start from the white inlet: the line has to begin at the white round inlet, so anchor the inlet end first before adding any other piece.
- Plan with the 3×3 letter grid in mind: the run covers the cells D, E, H, I, F, C, B, and A. Sketch the path through the grid before laying any pipe.
- Connect in the D → E → H → I → F → C → B → A order: those eight valid stops are the route, and the letter row accepts only that sequence.
- Watch the right side of the frame carefully: from bottom-middle H the line goes to bottom-right I, then climbs up through middle-right F and top-right C, then crosses left to top-middle B and finally top-left A. Do not turn the wrong way at F.
- Avoid wrong branches: any pipe that does not join end-to-end with the main line, or that opens onto an extra cell, will break the route.
- Press the flower button to submit: once the run reaches the arrow at the top, press the flower button at the bottom to lock in the answer and move to the next scene.
Share this guide